1. What does PCM stand for?

(A) Pre calculated mesh
(B) Pulse Code Modulation
(C) Passive current Module
(D) Positive current Module

2. A smaller pinion gear does what to your car?

(A) More top speed
(B) Less run time
(C) More damping
(D) More acceleration

3. What is the "timing advance" on a Roar 98 stock motor?

(A) 13 degrees
(B) 0 degrees
(C) 24 degrees
(D) 24 degree retard

4. What is the Main ingredient in Nitro RC car fuel?

(A) Gasoline
(B) Nitro Methane
(C) Oil
(D) Methyl Alcohol

5. You get less run time with a 7 cell battery as opposed to a 6 cell battery.

(A) True
(B) False
(C) Depends on weight of car
(D) Depends on motor used

6. The standard RC electric motor shaft size is what?

(A) 1 cm
(B) 1/8 inch
(C) 3/32 inch
(D) 4 mm

7. We put a _______ Pipe on our nitro engines.

(A) Wammy
(B) Power Pull
(C) Super Fast
(D) Tuned

8. At what rate do most standard 7.2 volt battery chargers charge at?

(A) 100 Amps
(B) Between 10 and 15 Amps
(C) 20 Milli Amps
(D) Between 3 and 6 Amps

9. What does "getting a holeshot" mean?

(A) Falling into a rut on the track
(B) Blowing a tire
(C) Top Qualifying
(D) Getting into the lead from the starting line

10. If you are running a 25 tooth pinion and a 100 tooth spur gear, what is your ratio?

(A) 4 to 1
(B) 2500
(C) 1 to 4
(D) 40

Copyright 1998 - 2000.  Sirace Services, all rights reserved.